On screenDefinition
Foot traffic attribution
A measurement approach that tries to connect ad exposure to physical visits at a store, office, dealership or other location. It also goes by store visit attribution or visit lift measurement. Most methods estimate the difference in visit rates between people who had an opportunity to see an ad and a comparable group who did not.
How does foot traffic attribution work?
Most approaches have three parts: an exposure definition, a visit definition and a comparison. Each one involves assumptions, and the assumptions drive the result.
- 1Exposure. The method decides who counts as exposed. For out-of-home, that is typically a device observed near a screen or inside a defined area during a time window. This is an opportunity to see, not proof that someone looked. See opportunity to see.
- 2Visit. The method decides what counts as a visit to the advertiser's location, usually a device observed at or inside a mapped boundary, sometimes with a minimum stay.
- 3Comparison. Exposed visit rates are compared with a control group, often built with matched markets or synthetic controls. The IAB's measurement guide describes these as ways to isolate campaign impact.
The output is usually a visit lift: the extra visit rate attributed to the campaign over what the control group suggests would have happened anyway. That is the same logic as incrementality testing, applied to a visit instead of a sale.
Why does it matter for media planners?
Out-of-home has no click, so clients who run on search and social often ask how a screen in the real world ties to the real world. Foot traffic attribution is one answer, because the outcome it measures is a physical visit. It is most relevant when the client has a location people can walk into and a visit is a meaningful step toward revenue.
It fits best as one signal among several. Pair it with promo code tracking, branded search lift and offline conversion data, then read them together. The guide on measuring out-of-home without clicks covers how to combine them.
What are the privacy and accuracy caveats?
Visit attribution rests on device-level location data, and that creates limits you should raise with any vendor before you commit a client to it.
| Issue | What it means for you |
|---|---|
| Consent and privacy | Location data depends on how it was collected and whether users agreed. Ask the vendor how consent is handled and what privacy rules apply. Check your own compliance requirements. |
| Sample, not census | Only a subset of devices appears in the data, so counts are scaled up by modeling. Small campaigns and small locations can produce noisy results. |
| Location precision | Signals can be imprecise in dense areas or multi-tenant buildings. Neighboring businesses can be mistaken for the advertiser. |
| Exposure is not attention | Being near a screen does not show someone watched. Visit lift says nothing about recall; for that, see ad recall. |
| Control group quality | A poorly matched control inflates or hides lift. See how to choose a control market. |
| Correlation risk | Weather, promotions and seasonality also move visits. Without a sound control, attribution can overstate the ad's role. |
How does it apply to in-venue DOOH?
With venue-based screens, the person is already inside the host venue, such as a restaurant, a service lounge or a gym front desk. The visit you want to measure is usually to a different location, such as a nearby shop or a client's other site. That makes the exposure window and the distance between the two places important choices in the design.
CETV Now has not published a foot traffic attribution offering, and this page does not suggest it provides one. What is approved is delivery reporting: CETV Now describes venue-level impression reporting, real-time statistics and 24/7 campaign monitoring, tracked against CETV Now network data, with results varying by campaign. Read more in delivery reporting in DOOH. If you plan to run a third-party visit study on top of a campaign, ask the team what delivery data you can share with that vendor.
What should you ask before using it?
- How is exposure defined, and over what radius and time window?
- What counts as a visit, and how are neighboring businesses handled?
- How is the control group built, and can you see how it was matched?
- How is location data collected, and how is consent handled?
- What is the minimum campaign size for a readable result?
- How will the result be presented to the client, as a range or a single number?
Targeting can also shape the design. CETV Now targeting runs from neighborhood and zip code to individual venue, layered with daypart, which gives you cleaner test and comparison cells. The agency planning page and the campaign brief template are useful starting points when you want to build measurement into the plan before launch. To discuss a campaign, use the plan-a-campaign option on this page.
