CETV Now
Glossary

What is audience measurement in out-of-home advertising?

Audience measurement in out-of-home is the set of methods used to estimate how many people were exposed to an ad. Different methods answer different questions: how many people passed by, how many could have seen a screen, and how many times an ad actually played. Numbers from one method should not be mixed with another.

By the CETV Now teamFor advertisersUpdated 4 min read

Selective focus of a Netflix screen on a smart TV in an indoor setting.
On screen
Photo by https://kaboompics.com/ on Pexels

Definition

Audience measurement (out-of-home)

The methods used to estimate how many people were exposed to an out-of-home ad, and sometimes who they were. It produces estimates of exposure, not proof that someone noticed, remembered or acted on the ad.

If you are deciding where to spend, audience measurement is how a screen or a placement turns into a number you can compare. The catch is that "audience" can mean several different things depending on who is counting and how. Knowing which one you are looking at matters more than the size of the number. For the wider category, see what DOOH advertising is.

Counting traffic vs. estimating viewers

These two ideas are often blurred together, and they should not be.

  • Traffic counts measure how many people or vehicles pass a location or enter a venue. A door counter in a waiting room or a road count outside a storefront are examples. Traffic says people were nearby, not that they could see the ad.
  • Viewer estimates try to narrow traffic down to people who had a realistic chance of seeing the screen, based on things like placement, screen visibility and how long people are in the space. These are modeled estimates, and the modeling choices change the result.

The IAB's Digital Out-of-Home Measurement Guide distinguishes impression types such as Opportunity to See and Likelihood to See, which reflects this same split between who was present and who was likely to see. It also discusses audience metrics such as dwell time, engagement and attention, measured through sensors, mobile data or panels. Read the IAB overview.

Dwell time, how long people stay in a venue, is a useful input but not a measure of attention. CETV Now reports average dwell time of 15+ minutes across its network, which is CETV Now network data and not third-party audited. More on that in dwell time.

Delivery vs. audience

Delivery is a count of what the system did: how many times your ad played, where and when. Audience is an estimate of the people who were present when it played. A delivery report can be exact about plays and still say little about how many people were in the room.

Both are useful. Delivery tells you whether the schedule you bought was carried out. Audience tells you what that schedule might have been exposed to. Keep them in separate columns when you review a campaign.

CETV Now tracks and reports delivery against CETV Now network data, with venue-level impression reporting, real-time statistics and 24/7 campaign monitoring. Results vary by campaign. CETV Now has not published a methodology here, so ask the team how a figure is defined before you compare it with anything else. For a walkthrough of the report itself, see how to read a DOOH delivery report, and for the term, impressions.

Why numbers from different sources do not combine

Two sources can both report the same impression total and mean different things. One may count every person who passed a screen. Another may count only people estimated to be facing it. A third may count ad plays. Adding them, or putting them side by side in one plan, gives a figure that no method can explain.

Three common numbers and what each one tells you
NumberWhat it countsWhat it cannot tell you
TrafficPeople or vehicles passing or entering a locationWhether anyone could see the screen
Estimated viewersPeople modeled as likely to see the screenWhether they paid attention or acted
Ad plays (delivery)Times the ad actually ranHow many people were present

The same caution applies to reach and frequency. Both depend on how an audience was counted, so compare them only within one method. See reach and frequency.

Questions to ask about measurement

  1. 1What exactly is being counted: people nearby, people likely to see the screen, or ad plays?
  2. 2Is the figure measured, modeled, or supplied by the venue?
  3. 3Is it audited by a third party or reported by the seller? CETV Now network figures such as 150M+ monthly impressions are CETV Now reported and not third-party audited.
  4. 4Is the number at the venue level or rolled up across a network? CETV Now provides venue-level impression reporting; no market-level breakdown of network totals is approved for publication.
  5. 5Can the definition be applied the same way to every venue and every campaign you compare?
  6. 6How quickly can you see delivery? CETV Now offers real-time statistics.

Write down your goal first, then pick the measure that fits it. The guide to setting DOOH campaign goals and the campaign planning checklist can help. If you are ready to plan, share your markets, venue categories, creative and budget through the advertiser page and ask how the reporting will be defined.

Figures reflect CETV Now network data and are provided for informational purposes. Individual campaign results vary; no specific outcome is guaranteed.

FAQ

Frequently asked questions

It is the set of methods used to estimate how many people were exposed to an out-of-home ad. Methods range from counting traffic to modeling who could see a screen to counting ad plays. Each answers a different question.

Common approaches include traffic counts, sensors, mobile location data and panels, which are then used to estimate who had an opportunity or likelihood to see an ad. The exact method varies by seller and by format, so ask for the definition.

No. Exposure estimates say people were present or likely able to see a screen. Attention, recall and action need separate measurement, and dwell time is not a measure of attention.

Not safely. Sources may define an impression differently, for example people passing, people likely to see the screen, or ad plays. Compare numbers only within one method.

CETV Now reports venue-level impressions with real-time statistics and 24/7 campaign monitoring. It has not published a methodology on this page, so ask the team how a figure is defined. Results vary by campaign.

Plan your campaign

Put your video on screens people actually watch.

Tell us your markets, venue categories, creative and budget. We'll map a plan to the venues where your audience spends time and send you a quote.